TUW-74 Product technical specification(TDS)
Product name:
TUW-74 Fluorinated liquid
Application preparation :
TUW-74 is a colorless and odorless transparent liquid widely used in precision cleaning, solvent diluents, and can also be used for preparing polymers, synthesizing surfactants, polymer additives, and so on. Widely used as a cooling medium, fluorocarbon solvent (such as AF solvent), and electronic cleaning agent.
Immersion phase change liquid cooling can be used in various data service centers such as cloud computing data centers, ultra-high voltage power grids, high-speed rail power inverters, lithium-ion battery powered vehicles, wind turbines, nuclear power, military radar systems, etc;
It can also be used for temperature control, heat transfer, and packaging testing in the semiconductor industry.
Product characteristics :
Features: colorless, tasteless, non- toxic, safe, non flammable, mild solubility, insoluble in water, good thermal stability, high density, low surface tension, low viscosity, low latent heat of evaporation, excellent material compatibility.
Advantages: environmental protection and cleanliness, safe use, goodinsulation performance, no damage to electronic precision equipment, and no damage to electronic components and circuits. Through distillation regeneration, the amount of industrial waste is greatly reduced and the effect of rapid drying can be achieved.
Product application scope :
1.Solvent: fluorocarbon solvent and AF solvent;
2.Liquid leakage at the side of electronic components, air tightness test of electronic parts (IC, LSI parts) or electronicdevices;
3.Live cleaning equipment and insulating fluid;
4.Electronic precision cleaning, optical cleaning and dehydration cleaning;
5.Heat transfer fluid and cooling medium;
6.Hydraulic transmission fluid and electronic equipment sealing isolation fluid;
7.Solvent diluent, lubricant diluent, polymer additive, special purpose solvent, etc;
8.Make polymer monomers with strong heat and corrosion resistance, good hydrophobicity and low dielectric constant;
9.Used for temperature control, heat transfer, and packaging testing in the semiconductor industry.
Product attributes :
boiling point
|
74℃
|
colour
|
none
|
density
|
1.7g/cc
|
flash point
|
none
|
surface tension
|
12.7mN/m
|
specific heat
|
1.34J/g℃
|
Saturated water content
|
46ppm
|
viscosity
|
0.65mPa.s
|
Heat of vaporization
|
124J/g℃
|
dielectric constant
|
1.93
|
ODP
|
0
|
Combustion range
|
none
|
GWP
|
20
|
Dielectric strength
|
53kV
|
PH value
|
7
|
GDP
|
Low
|
smell
|
tasteless
|
|
|
Product storage and transportation :
1.TUW-74 shall be stored in a clean and dry warehouse to prevent high temperature sunlight, away from heat source, away from acid, strong alkali, oxidant, etc.
2.TUW-74 is a non-toxic, non combustible, colorless and transparent liquid. It is transported as non dangerous goods. Violent oscillation shall be avoided during transportation and inversion shall be avoided during stacking.
Product safety and precautions :
1. Local regulations on normal protection and industrial hygiene related to chemical treatment must be observed,and thermal decomposition products shall not be inhaled. Avoid skin contact with hot substances.
2.Do not eat,drink or smoke when using this product. Clean thoroughly after operation. Avoid release into the environment. Avoid contact with oxidants (such as chlorine, chromic acid,etc.).
3. When using this product, we should abide by the information and suggestions provided in our chemical safety technical manual. Basic precautions for handling chemicals should also be in place.
Product safety and precautions:
1.Local regulations on normal protection and industrial hygiene related to chemical treatment must be observed, and thermal decomposition products shall not be inhaled. Avoid skin contact with hot substances.
2.Do not eat, drink or smoke when using this product. Clean thoroughly after operation. Avoid release into the environment. Avoid contact with oxidants (such as chlorine, chromic acid, etc.).
3.When using this product, we should abide by the information and suggestions provided in our chemical safety technical manual. Basic precautions for handling chemicals should also be in place.
Company name: Shenzhen Huayi Brother Technology Co., Ltd
Office address: South China city development building, Pinghu street, Longgang District, Shenzhen
Factory address: jieying Technology Park, Bihu Avenue, Fenggang town, Dongguan
Tel: 0755-23737136 or +86 15914124590